|
TARGA
ADJUSTIBLE FRONT
LIFT STAND
Every service department, race team or home workshop will find the
TARGA Paddock Stand invaluable for tire/wheel changing, brake work or
wheel cleaning. The sliding arms adjust from 6-5/8" to 9-7/8" to allow
the pickup ball studs to fit all sportbike fork leg spacing.
The all welded steel frame is designed to lift high enough to remove
the front wheel with fender clearance. Finished with a durable black
wrinkle powder coated paint and nickel plated adjustable arms, the
TARGA Paddock Stand has welded steel safety stops for the fork leg in
addition to the round top pickup ball studs. Works on all pinch bolt
type axle clamps on fork legs that are of equal length below the axle
centerline.
The TARGA Paddock Stand must be used with either a rear swingarm stand,
centerstand or if used alone must have the bike supported by a second
person while the bike is elevated. It is not intended as a showroom or
shop display stand and the bike should never be left unattended while
on a front lift stand only.
$114.95
|
TARGA
BUTTON REAR
LIFT STAND
Every service department, race
team or home workshop will find the TARGA Paddock Stand invaluable for
tire/wheel changing, brake work or wheel cleaning. The sliding arms
adjust from 6-5/8" to 9-7/8" to allow the pickup ball studs to fit all
sportbike fork leg spacing.
The all welded steel frame is designed to lift high enough to remove
the front wheel with fender clearance. Finished with a durable black
wrinkle powder coated paint and nickel plated adjustable arms, the
TARGA Paddock Stand has welded steel safety stops for the fork leg in
addition to the round top pickup ball studs. Works on all pinch bolt
type axle clamps on fork legs that are of equal length below the axle
centerline.
The TARGA Paddock Stand must be used with either a rear swingarm stand,
centerstand or if used alone must have the bike supported by a second
person while the bike is elevated. It is not intended as a showroom or
shop display stand and the bike should never be left unattended while
on a front lift stand only.
$120.95
|
WOOD CRAFT
EASY LIFT
REAR PAD STAND
Rear Pad Stand
Low Lift Effort & easy adjustability
Super Stable quad 4 inch Wheels that roll over almost anything
Super tacky swingarm pads to avoid slippage
Woodcraft's trademark extra large quad 4" wheels are extremely stable
and facillitate both lifting the bike on rough surfaces and rolling the
bike around the shop!!
$129.95
|
WOOD CRAFT
REAR SPOOL STAND
Rear Spool Stand
Low Lift Effort & Sturdy construction
Super Stable quad 4 inch Wheels that work on carpet, concrete, asphalt,
or dirt!
Wide Lift Forks for easy spool location
Adjustable: designed to be flexible to fit all bikes using spools
We have used the adjustable stands from LP & they are a royal pain
in the a$$!
Just bend a half inch in one direction or the other to fit!
Quality only Woodcraft can deliver!
$115.95
|
WOOD CRAFT
SOLO OPERATION
FRONT STAND
Adjustable
height upper stanchion allows use on all bikes from a RS125 to a ZX12
and accounts for variable wheel heights and fenderrances
Woodcraft's trademark extra large quad 4" wheels are extremely stable
and facillitate lifting the bike on rough surfaces
Mechanics appreciate both the easy lift effort and ample workseat
clearance around the front wheel!!
$160.95
|
THE STAND
PORTABLE SSP1000 Stainless Steel
The Stand Stainless Steel - Portable SSP1000
New, from Giesler Engineering. The portable motorcycle stand. Successor
to the Famous M1000 the new stand does everything the M1000 did, but it
is portable. When disassembled, it's longest dimension is under 18
inches, fitting standard saddlebags. No longer do you need to be
somewhere that you cannot lift your bike. Assembles in a minute. Rubber
sleeve covers the area where the stand contacts your motorcycle. Powder
coated finish. Guaranteed to fit all Harleys.
$214.95
|
THE STAND
MSH1000 PORTABLE
The Stand model MSH1000
If you own a Honda Valkyrie or Yamaha Venture, The Stand model MHS-1000 is specially designed to fit. The MHS 1000 Portable breaks down to fit in your saddle bag.
$180.95
|
THE STAND
MH1000
The Stand model MH1000
If your motor casing is lower than the frame (as in most Hondas) , The
Stand model MH-1000 will fit.
$160.95
|
SILK STAND
Slik Stand
-Fits tires up to 6 1/2" wide
Powder Coated (Black only)
Heavy Duty 11 Gauge Steel
Lifetime Guarantee
Works with any Motorcycle
Tubular cross bar is 2"x2"x35"
Shoe is 22" long and 6 1/2" wide
$135.95
|
MORSE
NO LONGER AVAILABLE
STAND
MORSE Racing Switchblade Folding
Rear Stand
For years racers have struggled with getting all their gear to the
track and back. Morse Racing Products, Inc has solved a small portion
of that problem with a revolutionary new adjustable rear stand. The
Morse Racing Products SWITCHBLADE stand folds up and locks flat when
not being used taking up a 1/4 of the space needed with traditional
stands. It can be hung on the wall of a trailer, or slipped neatly
under the motorcycle in transit. The sturdy SWITCHBLADE stand is built
to outlast many of the stands on the market today with its steel
construction and premium hardware.
$00.00
|
CIRCUIT STAND
T STAND
Circuit 1 T-Stands Features
Made from 1in x 1in square tubing.
Comes with both T-Stands and a lift bar.
A must for removing the rear shock.
$69.95
|
FLY RACING
NO LONGER AVAILABE
Fly Racing Sport Bike Stands
Features
Lightweight but very strong
6061 aluminum construction with double butted ends
Adjustable to fit most sport bikes
Durable rubber grip
Sealed roller bearings in wheels for smooth long lasting action
$00.00
|
LOCKHART
PILLIPS
ADJUSTIBLE SWINGARM
STAND
Lockhart Phillips Adjustable
Swingarm Stand Features
Adjustable width fits all swingarms.
Spring loaded contact pads have clip pins for easy adjustment.
Contact pads rotate to stay in full contact with the swing arm.
Rubber contact pads prevent slippage and scratches.
Gloss white powder coat finish.
Large 1 1/4" steel tube construction creates unbeatable strength.
Extended handle loop offers easy lift leverage.
Riveted skids prevent paint damage.
Large diameter 2 piece wheels roll easily on irregular surfaces.
Tubular braces create no-flex performance.
Rubber insert caps seal off tubing.
$75.95
|
LOCKHART
PILLIPS
UNIVERSAL FRONT
RACE STAND
Lockhart Phillips USA Universal Race Front Stand Features
The universal fork mount system fits into the recessed hole at the
bottom of nearly all sportbike forks. The adjustable head also allows
it to be used with uneven length fork tubes. Use with rear stand.
Adjustable width and height.
3 1/2" diameter "dually" wheels roll easily.
Fork pin and bracket will not strip axle bolt threads.
Oversize tubing is chrome plated for durability.
Adjustable mount rotates in uprights.
$105.95
|
LOCKHART
PILLIPS
RACE SWINGARM
STAND
Lockhart Phillips USA Race
Swingarm Stand Features
New design offers more leverage with 4 inch longer handle.
3 1/2" diameter "dually" wheels easily roll over rocks and wrenches.
Adjustable "Y" brackets reduce swingarm damage.
Oversize 1 1/4" tubing is chrome plated for durability.
Button kits available separately for different swingarms
$105.95
|
POWER STAND
MAX SPOOL
NON SPOOL
REAR
Powerstands Max Spool & Non
Spool Rear Powerstands Features
Show quality chrome.
Massive 2in & 1.5in steel tubing.
Free color grips in blue black and yellow.
Large quad solid wheels.
Low effort one hand lift.
Includes FREE removable toolbox.
$135.95
|
POWER STAND
MICK FORKLIFT
STAND
Powerstands Mick Fork Lift
Powerstands Features
Show quality chrome.
Massive 2in & 1.5in steel tubing.
Free color grips in blue black and yellow.
Large quad solid wheels.
Low effort one hand lift.
$135.95
|
FLY RACING
ALUMINUM
BI FOLD ATV
RAMP
Fly Racing ALUMINUM BI FOLD ATV
RAMP Features
NO LONER AVAILABLE
$00.00
|
FLY RACING
NO LONER AVAILABLE
FOLDING ATV
RAMP
Fly Racing ALUMINUM FOLDING ATV
RAMPS Features
Folds in half for easy carrying and storage
Rubberized angle cut base for maximum slip resistance
Rungs have extruded surface groves for added traction
6061 T-6 extruded aluminum surface
Ultra heavy duty design
Rated 1700 lbs.
$00.00
|
FLY RACING
NO LONER AVAILABLE
MOTORCYCLE
RAMP
Fly Racing ALUMINUM MOTORCYCLE
RAMP Features
A full 6' heavy duty ramp with a long tongue and non-slip rubber pad
Tongue is welded to ramp; no assembly required
Extruded 6061 T-6 aluminum
Load rated to 500 lbs
Individually boxed
$00.00
|
FLY
RACING
NO LONER AVAILABLE
ALUMINUM
FOLDING
MOTORCYCLE
RAMP
Fly Folding Ramp * Oversize Item
Features
Super Lightweight Aluminum Design
Folds in half for compact stowage
Folded approx 44"
Extended 9 1/2w x 79" long
$00.00
|
NO LONER AVAILABLE
ALUMINUM
FOLDING RAMP
Fly
Folding Ramp * Oversize Item Features
Super Lightweight Aluminum Design
Folds in half for compact stowage
Folded approx 44"
Extended 9 1/2w x 79" long
$00.00
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
