SUOMY HELMETS 1 ALL SUOMY HELMETS ARE FREE SHIPPING. Aerodynamic design for exceptional stability and low wind noise Suomy is again pushing the boundaries with its 2008 introduction into the premium helmet market: the EXTREME is the high end version of the Suomy Spec-1R. In addition to the standard Spec-1R features, the Extreme offers new technological advancements: • Ultra Tech Face Shield: a translucent opalescent iridium finish with a special hydrophobic coating allows water to easily roll off the shield’s surface. Anti-IR coating blocks heat and keeps riders face cool. • Alcantara: luxurious chamois-like liner • Ram air intake: closable design ducts air into the helmet body, pressurizing cool air into the unique waffled EPS channeled system. • Air wedge top diffuser: extracts hot air and its aggressive design provides aerodynamic stability. SPEC 1R Custom graphics are just the start for these incredible new Suomy Replica helmets. Pushing available technology to the limits, the all-new SPEC 1R Replica captures the very best of Suomy’s latest innovations, all in an extremely lightweight package bursting with features and technology sure to please the mid- to high-end market segment. Among the outstanding technology features found on this helmet is an advanced Dynamically Variable Resistance Crush Zone designed into the EPS. This unique technologically advanced EPS design allows not only maximized energy management in the lateral and horizontal planes, but also allows unprecedented airflow from virtually the entire head area. Further advancements are a fully integrated Ram Air duct which works in perfect harmony with the EPS system. The exhaust channels and integrated venting system round off this impressive road race package. The complete lists of features found on the SPEC 1R are: • Ultra-light weight • 2 shell sizes to maximize fit • DVRCTM (Dynamically Variable Resistance Crush Zone designed into the EPS) • Removeable washable 3D cheek pads with Ultralure • Removeable washable Comfort liner with Ultralure • Aerodynamically functional exhaust channels • Sound absorbing polymers • S.E.C.TM (Structurally Enhanced Composite Fiber Weave) - Integrated design to dissipate energy throughout the entire shell • Hot cured bag molded construction • Advanced channeled EPS for optimum venting • Race approval by every major US motorcycle race organization • DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls Need info on any of our helmet please contact us at. sales@extremebikescustoms.com. PLEASE SEE THE SIZING CHART FOR HELP  IN PRODUCT  SIZING HELMETS SIZING CHART

Click picture for close up view

SUOMY HELMETS EXTREME SUOMY Helmet Extreme Capirossi Pushing the limit is what "extreme" is all about, and Suomy's new Spec-1R Extreme sets a new standard. In addition to the standard Spec-1R features, the Extreme offers remarkable technological advancements that push helmet technology to the Extreme. This incredible helmet is an enhanced version of Suomys top rated Spec-1R. • The lightest weight (1250 grams), race approved helmet available • 3 shell sizes for ultimate fit • DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) • Removable washable 3D cheek pads (allows for adjustable custom fit) • Removable washable Comfort liner (allows for adjustable custom fit) • Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers • Safety Lock visor system • Breath Deflector • S.E.C.™ (Structurally Enhanced Composite Fiber Weave) • Hot Cured Bag Molded construction • Oversized sponge cervical neck roll • Advanced Channeled EPS for optimum venting • Race approval by every major US Motorcycle Race Organization • DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls • Ultra Tech Face Shield - Standard to the Extreme is a unique face shield incorporating a beautifully translucent Opalescent Iridium finish with a special hydrophobic coating - this allows water to easily roll off the surface of the shield, an anti-IR coating to block heat and keep the riders face cool, and a state-of-the-art anti-fog coating. And that's just the face shield! • Alcantara - Used in the finest exotic sports cars and top class furnishings, Alcantara is a luxurious fabric offering a level of softness, comfort and quality never before seen in the helmet market. Now, Alcantara is being used exclusively for the Spec-1R Extreme's comfort liner, providing a perforated chamois-like material for ultimate comfort, water wicking, coolness and durability. • Ram Air Intake - The Spec 1R Extreme comes standard with this new cooling device. Located above the top of the forehead, this specially designed intake duct forces air into the helmet body in the open position, pressurizing cool air into the Spec 1R's unique waffled EPS channeled system. Flipping the switch to the off position on the Intake Duct closes the ram air intake from the rest of the system. • Air Wedge Top Diffuser - An extreme helmet deserves an extreme top diffuser and the new, Suomy Air Wedge is just that: designed to work in concert with the Ram Air Intake duct, the Air Wedge performs the duty of extracting hot air from the helmet body and out the back of the wedge. Its aggressive design provides a further function; the Air Wedge creates vortices towards the back of the helmet, defeating the potential for helmet lift at high speeds providing an extremely stable helmet, even at Daytona speeds. • Ultimate Graphics - Suomy is renowned for its top quality graphics. The Extreme series of the Spec-1R helmet come with graphics that once again raise the bar for helmet graphics everywhere. Combining Suomy's state-of-the-art graphic technology with a unique series of base paints and ultra-smoothclear coating put the ultimate finish on these outstanding helmets. $629.95 XS 01-4543 SM 01-4544 MD 01-4545 LG 01-4546 XL 01-4547 XXL 01-4548 XXXL 01-4549	SUOMY HELMETS EXTREME Extreme Italia Pushing the limit is what "extreme" is all about, and Suomy's new Spec-1R Extreme sets a new standard. In addition to the standard Spec-1R features, the Extreme offers remarkable technological advancements that push helmet technology to the Extreme. This incredible helmet is an enhanced version of Suomys top rated Spec-1R. • The lightest weight (1250 grams), race approved helmet available • 3 shell sizes for ultimate fit • DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) • Removable washable 3D cheek pads (allows for adjustable custom fit) • Removable washable Comfort liner (allows for adjustable custom fit) • Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers • Safety Lock visor system • Breath Deflector • S.E.C.™ (Structurally Enhanced Composite Fiber Weave) • Hot Cured Bag Molded construction • Oversized sponge cervical neck roll • Advanced Channeled EPS for optimum venting • Race approval by every major US Motorcycle Race Organization • DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls • Ultra Tech Face Shield - Standard to the Extreme is a unique face shield incorporating a beautifully translucent Opalescent Iridium finish with a special hydrophobic coating - this allows water to easily roll off the surface of the shield, an anti-IR coating to block heat and keep the riders face cool, and a state-of-the-art anti-fog coating. And that's just the face shield! • Alcantara - Used in the finest exotic sports cars and top class furnishings, Alcantara is a luxurious fabric offering a level of softness, comfort and quality never before seen in the helmet market. Now, Alcantara is being used exclusively for the Spec-1R Extreme's comfort liner, providing a perforated chamois-like material for ultimate comfort, water wicking, coolness and durability. • Ram Air Intake - The Spec 1R Extreme comes standard with this new cooling device. Located above the top of the forehead, this specially designed intake duct forces air into the helmet body in the open position, pressurizing cool air into the Spec 1R's unique waffled EPS channeled system. Flipping the switch to the off position on the Intake Duct closes the ram air intake from the rest of the system. • Air Wedge Top Diffuser - An extreme helmet deserves an extreme top diffuser and the new, Suomy Air Wedge is just that: designed to work in concert with the Ram Air Intake duct, the Air Wedge performs the duty of extracting hot air from the helmet body and out the back of the wedge. Its aggressive design provides a further function; the Air Wedge creates vortices towards the back of the helmet, defeating the potential for helmet lift at high speeds providing an extremely stable helmet, even at Daytona speeds. • Ultimate Graphics - Suomy is renowned for its top quality graphics. The Extreme series of the Spec-1R helmet come with graphics that once again raise the bar for helmet graphics everywhere. Combining Suomy's state-of-the-art graphic technology with a unique series of base paints and ultra-smoothclear coating put the ultimate finish on these outstanding helmets. $629.95 XS 01-4613 SM 01-4614 MD 01-4615 LG 01-4616 XL 01-4617 XXL 01-4618 XXXL 01-4619	SUOMY HELMETS EXTREME Extreme Double Grey The name says it all, • The lightest weight (1250 grams), race approved helmet available • 3 shell sizes for ultimate fit • DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) • Removable washable 3D cheek pads (allows for adjustable custom fit) • Removable washable Comfort liner (allows for adjustable custom fit) • Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers • Safety Lock visor system • Breath Deflector • S.E.C.™ (Structurally Enhanced Composite Fiber Weave) • Hot Cured Bag Molded construction • Oversized sponge cervical neck roll • Advanced Channeled EPS for optimum venting • Race approval by every major US Motorcycle Race Organization • DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls • Ultra Tech Face Shield - Standard to the Extreme is a unique face shield incorporating a beautifully translucent Opalescent Iridium finish with a special hydrophobic coating - this allows water to easily roll off the surface of the shield, an anti-IR coating to block heat and keep the riders face cool, and a state-of-the-art anti-fog coating. And that's just the face shield! • Alcantara - Used in the finest exotic sports cars and top class furnishings, Alcantara is a luxurious fabric offering a level of softness, comfort and quality never before seen in the helmet market. Now, Alcantara is being used exclusively for the Spec-1R Extreme's comfort liner, providing a perforated chamois-like material for ultimate comfort, water wicking, coolness and durability. • Ram Air Intake - The Spec 1R Extreme comes standard with this new cooling device. Located above the top of the forehead, this specially designed intake duct forces air into the helmet body in the open position, pressurizing cool air into the Spec 1R's unique waffled EPS channeled system. Flipping the switch to the off position on the Intake Duct closes the ram air intake from the rest of the system. • Air Wedge Top Diffuser - An extreme helmet deserves an extreme top diffuser and the new, Suomy Air Wedge is just that: designed to work in concert with the Ram Air Intake duct, the Air Wedge performs the duty of extracting hot air from the helmet body and out the back of the wedge. Its aggressive design provides a further function; the Air Wedge creates vortices towards the back of the helmet, defeating the potential for helmet lift at high speeds providing an extremely stable helmet, even at Daytona speeds. • Ultimate Graphics - Suomy is renowned for its top quality graphics. The Extreme series of the Spec-1R helmet come with graphics that once again raise the bar for helmet graphics everywhere. Combining Suomy's state-of-the-art graphic technology with a unique series of base paints and ultra-smoothclear coating put the ultimate finish on these outstanding helmets. $629.95 XS 01-4623 SM 01-4624 MD 01-4625 LG 01-4626 XL 01-4627 XXL 01-4628 XXXL 01-4629
SUOMY HELMETS EXTREME Extreme Amleto • The lightest weight (1250 grams), race approved helmet available • 3 shell sizes for ultimate fit • DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) • Removable washable 3D cheek pads (allows for adjustable custom fit) • Removable washable Comfort liner (allows for adjustable custom fit) • Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers • Safety Lock visor system • Breath Deflector • S.E.C.™ (Structurally Enhanced Composite Fiber Weave) • Hot Cured Bag Molded construction • Oversized sponge cervical neck roll • Advanced Channeled EPS for optimum venting • Race approval by every major US Motorcycle Race Organization • DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls • Ultra Tech Face Shield - Standard to the Extreme is a unique face shield incorporating a beautifully translucent Opalescent Iridium finish with a special hydrophobic coating - this allows water to easily roll off the surface of the shield, an anti-IR coating to block heat and keep the riders face cool, and a state-of-the-art anti-fog coating. And that's just the face shield! • Alcantara - Used in the finest exotic sports cars and top class furnishings, Alcantara is a luxurious fabric offering a level of softness, comfort and quality never before seen in the helmet market. Now, Alcantara is being used exclusively for the Spec-1R Extreme's comfort liner, providing a perforated chamois-like material for ultimate comfort, water wicking, coolness and durability. • Ram Air Intake - The Spec 1R Extreme comes standard with this new cooling device. Located above the top of the forehead, this specially designed intake duct forces air into the helmet body in the open position, pressurizing cool air into the Spec 1R's unique waffled EPS channeled system. Flipping the switch to the off position on the Intake Duct closes the ram air intake from the rest of the system. • Air Wedge Top Diffuser - An extreme helmet deserves an extreme top diffuser and the new, Suomy Air Wedge is just that: designed to work in concert with the Ram Air Intake duct, the Air Wedge performs the duty of extracting hot air from the helmet body and out the back of the wedge. Its aggressive design provides a further function; the Air Wedge creates vortices towards the back of the helmet, defeating the potential for helmet lift at high speeds providing an extremely stable helmet, even at Daytona speeds. • Ultimate Graphics - Suomy is renowned for its top quality graphics. The Extreme series of the Spec-1R helmet come with graphics that once again raise the bar for helmet graphics everywhere. Combining Suomy's state-of-the-art graphic technology with a unique series of base paints and ultra-smoothclear coating put the ultimate finish on these outstanding helmets. $629.95 XS 01-4603 SM 01-4604 MD 01-4605 LG 01-4606 XL 01-4607 XXL 01-4608 XXXL 01-4609	SUOMY HELMETS EXTREME Extreme Chief Red • The lightest weight (1250 grams), race approved helmet available • 3 shell sizes for ultimate fit • DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) • Removable washable 3D cheek pads (allows for adjustable custom fit) • Removable washable Comfort liner (allows for adjustable custom fit) • Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers • Safety Lock visor system • Breath Deflector • S.E.C.™ (Structurally Enhanced Composite Fiber Weave) • Hot Cured Bag Molded construction • Oversized sponge cervical neck roll • Advanced Channeled EPS for optimum venting • Race approval by every major US Motorcycle Race Organization • DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls • Ultra Tech Face Shield - Standard to the Extreme is a unique face shield incorporating a beautifully translucent Opalescent Iridium finish with a special hydrophobic coating - this allows water to easily roll off the surface of the shield, an anti-IR coating to block heat and keep the riders face cool, and a state-of-the-art anti-fog coating. And that's just the face shield! • Alcantara - Used in the finest exotic sports cars and top class furnishings, Alcantara is a luxurious fabric offering a level of softness, comfort and quality never before seen in the helmet market. Now, Alcantara is being used exclusively for the Spec-1R Extreme's comfort liner, providing a perforated chamois-like material for ultimate comfort, water wicking, coolness and durability. • Ram Air Intake - The Spec 1R Extreme comes standard with this new cooling device. Located above the top of the forehead, this specially designed intake duct forces air into the helmet body in the open position, pressurizing cool air into the Spec 1R's unique waffled EPS channeled system. Flipping the switch to the off position on the Intake Duct closes the ram air intake from the rest of the system. • Air Wedge Top Diffuser - An extreme helmet deserves an extreme top diffuser and the new, Suomy Air Wedge is just that: designed to work in concert with the Ram Air Intake duct, the Air Wedge performs the duty of extracting hot air from the helmet body and out the back of the wedge. Its aggressive design provides a further function; the Air Wedge creates vortices towards the back of the helmet, defeating the potential for helmet lift at high speeds providing an extremely stable helmet, even at Daytona speeds. • Ultimate Graphics - Suomy is renowned for its top quality graphics. The Extreme series of the Spec-1R helmet come with graphics that once again raise the bar for helmet graphics everywhere. Combining Suomy's state-of-the-art graphic technology with a unique series of base paints and ultra-smoothclear coating put the ultimate finish on these outstanding helmets. $629.95 XS 01-4633 SM 01-4634 MD 01-4635 LG 01-4636 XL 01-4637 XXL 01-4638 XXXL 01-4639	SUOMY HELMETS EXTREME Extreme Chief Blue • The lightest weight (1250 grams), race approved helmet available • 3 shell sizes for ultimate fit • DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) • Removable washable 3D cheek pads (allows for adjustable custom fit) • Removable washable Comfort liner (allows for adjustable custom fit) • Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers • Safety Lock visor system • Breath Deflector • S.E.C.™ (Structurally Enhanced Composite Fiber Weave) • Hot Cured Bag Molded construction • Oversized sponge cervical neck roll • Advanced Channeled EPS for optimum venting • Race approval by every major US Motorcycle Race Organization • DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls • Ultra Tech Face Shield - Standard to the Extreme is a unique face shield incorporating a beautifully translucent Opalescent Iridium finish with a special hydrophobic coating - this allows water to easily roll off the surface of the shield, an anti-IR coating to block heat and keep the riders face cool, and a state-of-the-art anti-fog coating. And that's just the face shield! • Alcantara - Used in the finest exotic sports cars and top class furnishings, Alcantara is a luxurious fabric offering a level of softness, comfort and quality never before seen in the helmet market. Now, Alcantara is being used exclusively for the Spec-1R Extreme's comfort liner, providing a perforated chamois-like material for ultimate comfort, water wicking, coolness and durability. • Ram Air Intake - The Spec 1R Extreme comes standard with this new cooling device. Located above the top of the forehead, this specially designed intake duct forces air into the helmet body in the open position, pressurizing cool air into the Spec 1R's unique waffled EPS channeled system. Flipping the switch to the off position on the Intake Duct closes the ram air intake from the rest of the system. • Air Wedge Top Diffuser - An extreme helmet deserves an extreme top diffuser and the new, Suomy Air Wedge is just that: designed to work in concert with the Ram Air Intake duct, the Air Wedge performs the duty of extracting hot air from the helmet body and out the back of the wedge. Its aggressive design provides a further function; the Air Wedge creates vortices towards the back of the helmet, defeating the potential for helmet lift at high speeds providing an extremely stable helmet, even at Daytona speeds. • Ultimate Graphics - Suomy is renowned for its top quality graphics. The Extreme series of the Spec-1R helmet come with graphics that once again raise the bar for helmet graphics everywhere. Combining Suomy's state-of-the-art graphic technology with a unique series of base paints and ultra-smoothclear coating put the ultimate finish on these outstanding helmets. $629.95 XS 01-4643 SM 01-4644 MD 01-4645 LG 01-4646 XL 01-4647 XXL 01-4648 XXXL 01-4649
SUOMY HELMETS EXTREME Extreme Ben Bostrom star • The lightest weight (1250 grams), race approved helmet available • 3 shell sizes for ultimate fit • DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) • Removable washable 3D cheek pads (allows for adjustable custom fit) • Removable washable Comfort liner (allows for adjustable custom fit) • Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers • Safety Lock visor system • Breath Deflector • S.E.C.™ (Structurally Enhanced Composite Fiber Weave) • Hot Cured Bag Molded construction • Oversized sponge cervical neck roll • Advanced Channeled EPS for optimum venting • Race approval by every major US Motorcycle Race Organization • DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls • Ultra Tech Face Shield - Standard to the Extreme is a unique face shield incorporating a beautifully translucent Opalescent Iridium finish with a special hydrophobic coating - this allows water to easily roll off the surface of the shield, an anti-IR coating to block heat and keep the riders face cool, and a state-of-the-art anti-fog coating. And that's just the face shield! • Alcantara - Used in the finest exotic sports cars and top class furnishings, Alcantara is a luxurious fabric offering a level of softness, comfort and quality never before seen in the helmet market. Now, Alcantara is being used exclusively for the Spec-1R Extreme's comfort liner, providing a perforated chamois-like material for ultimate comfort, water wicking, coolness and durability. • Ram Air Intake - The Spec 1R Extreme comes standard with this new cooling device. Located above the top of the forehead, this specially designed intake duct forces air into the helmet body in the open position, pressurizing cool air into the Spec 1R's unique waffled EPS channeled system. Flipping the switch to the off position on the Intake Duct closes the ram air intake from the rest of the system. • Air Wedge Top Diffuser - An extreme helmet deserves an extreme top diffuser and the new, Suomy Air Wedge is just that: designed to work in concert with the Ram Air Intake duct, the Air Wedge performs the duty of extracting hot air from the helmet body and out the back of the wedge. Its aggressive design provides a further function; the Air Wedge creates vortices towards the back of the helmet, defeating the potential for helmet lift at high speeds providing an extremely stable helmet, even at Daytona speeds. • Ultimate Graphics - Suomy is renowned for its top quality graphics. The Extreme series of the Spec-1R helmet come with graphics that once again raise the bar for helmet graphics everywhere. Combining Suomy's state-of-the-art graphic technology with a unique series of base paints and ultra-smoothclear coating put the ultimate finish on these outstanding helmets. $629.95 XS 01-4463 SM 01-4464 MD 01-4465 LG 01-4466 XL 01-4467 XXL 01-4468 XXXL 01-4469	SUOMY HELMETS EXTREME Extreme American Eagle The Suomy Spec 1-R Extreme American Eagle Helmet weighs just 1,250 grams – the lightest race-approved helmet available The Suomy Spec 1-R Extreme American Eagle Helmet features a structurally Enhanced Composite (S.E.C.) fiber weave helmet shell construction with sound-absorbing polymers Dynamically variable resistance crush zones designed into the EPS liner American Eagle Helmet interior is Alcantara, a luxurious fabric that offers the highest levels of softness, comfort and quality; has superior moisture wicking, cooling and durability The Suomy Spec 1-R Extreme American Eagle Helmet has a removable and washable helmet liner and cheek pads are interchangeable for a custom fit Ram air helmet intake forces air into a specially-designed interior channel system for maximum cooling when open; intake can be closed for cool-weather riding Air Wedge top diffuser works with the ram air system to extract warm air from the helmet interior; wedge also minimizes “helmet lift” even at high speeds Ultra Tech face shield has a translucent Opalescent Iridium finish with special hydrophobic coating that allows water to easily roll off the shield Anti-IR face shield coating blocks heat to keep the rider’s face cool Shield has state-of-the-art anti-fog coating Safety Lock visor system Oversized sponge cervical neck roll; removable breath deflector included Superior state-of-the-art helmet graphics and clearcoat finish Race-approved by every major U.S. motorcycle race organization; DOT and B.S.I. 6658 Type A (British Standards Institution) certified $629.95 XS 01-4513 SM 01-4514 MD 01-4515 LG 01-4516 XL 01-4517 XXL 01-4518 XXXL 01-4519	SUOMY HELMETS EXTREME Extreme Gambler • The lightest weight (1250 grams), race approved helmet available • 3 shell sizes for ultimate fit • DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) • Removable washable 3D cheek pads (allows for adjustable custom fit) • Removable washable Comfort liner (allows for adjustable custom fit) • Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers • Safety Lock visor system • Breath Deflector • S.E.C.™ (Structurally Enhanced Composite Fiber Weave) • Hot Cured Bag Molded construction • Oversized sponge cervical neck roll • Advanced Channeled EPS for optimum venting • Race approval by every major US Motorcycle Race Organization • DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls • Ultra Tech Face Shield - Standard to the Extreme is a unique face shield incorporating a beautifully translucent Opalescent Iridium finish with a special hydrophobic coating - this allows water to easily roll off the surface of the shield, an anti-IR coating to block heat and keep the riders face cool, and a state-of-the-art anti-fog coating. And that's just the face shield! • Alcantara - Used in the finest exotic sports cars and top class furnishings, Alcantara is a luxurious fabric offering a level of softness, comfort and quality never before seen in the helmet market. Now, Alcantara is being used exclusively for the Spec-1R Extreme's comfort liner, providing a perforated chamois-like material for ultimate comfort, water wicking, coolness and durability. • Ram Air Intake - The Spec 1R Extreme comes standard with this new cooling device. Located above the top of the forehead, this specially designed intake duct forces air into the helmet body in the open position, pressurizing cool air into the Spec 1R's unique waffled EPS channeled system. Flipping the switch to the off position on the Intake Duct closes the ram air intake from the rest of the system. • Air Wedge Top Diffuser - An extreme helmet deserves an extreme top diffuser and the new, Suomy Air Wedge is just that: designed to work in concert with the Ram Air Intake duct, the Air Wedge performs the duty of extracting hot air from the helmet body and out the back of the wedge. Its aggressive design provides a further function; the Air Wedge creates vortices towards the back of the helmet, defeating the potential for helmet lift at high speeds providing an extremely stable helmet, even at Daytona speeds. • Ultimate Graphics - Suomy is renowned for its top quality graphics. The Extreme series of the Spec-1R helmet come with graphics that once again raise the bar for helmet graphics everywhere. Combining Suomy's state-of-the-art graphic technology with a unique series of base paints and ultra-smoothclear coating put the ultimate finish on these outstanding helmets. $629.95 XS 01-4473 SM 01-4474 MD 01-4475 LG 01-4476 XL 01-4477 XXL 01-4478 XXXL 01-4479
SUOMY HELMETS EXTREME Extreme Dragon Pushing the limit is what "extreme" is all about, and Suomy's new Spec-1R Extreme sets a new standard. In addition to the standard Spec-1R features, the Extreme offers remarkable technological advancements that push helmet technology to the Extreme. This incredible helmet is an enhanced version of Suomys top rated Spec-1R. • The lightest weight (1250 grams), race approved helmet available • 3 shell sizes for ultimate fit • DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) • Removable washable 3D cheek pads (allows for adjustable custom fit) • Removable washable Comfort liner (allows for adjustable custom fit) • Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers • Safety Lock visor system • Breath Deflector • S.E.C.™ (Structurally Enhanced Composite Fiber Weave) • Hot Cured Bag Molded construction • Oversized sponge cervical neck roll • Advanced Channeled EPS for optimum venting • Race approval by every major US Motorcycle Race Organization • DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls • Ultra Tech Face Shield - Standard to the Extreme is a unique face shield incorporating a beautifully translucent Opalescent Iridium finish with a special hydrophobic coating - this allows water to easily roll off the surface of the shield, an anti-IR coating to block heat and keep the riders face cool, and a state-of-the-art anti-fog coating. And that's just the face shield! • Alcantara - Used in the finest exotic sports cars and top class furnishings, Alcantara is a luxurious fabric offering a level of softness, comfort and quality never before seen in the helmet market. Now, Alcantara is being used exclusively for the Spec-1R Extreme's comfort liner, providing a perforated chamois-like material for ultimate comfort, water wicking, coolness and durability. • Ram Air Intake - The Spec 1R Extreme comes standard with this new cooling device. Located above the top of the forehead, this specially designed intake duct forces air into the helmet body in the open position, pressurizing cool air into the Spec 1R's unique waffled EPS channeled system. Flipping the switch to the off position on the Intake Duct closes the ram air intake from the rest of the system. • Air Wedge Top Diffuser - An extreme helmet deserves an extreme top diffuser and the new, Suomy Air Wedge is just that: designed to work in concert with the Ram Air Intake duct, the Air Wedge performs the duty of extracting hot air from the helmet body and out the back of the wedge. Its aggressive design provides a further function; the Air Wedge creates vortices towards the back of the helmet, defeating the potential for helmet lift at high speeds providing an extremely stable helmet, even at Daytona speeds. • Ultimate Graphics - Suomy is renowned for its top quality graphics. The Extreme series of the Spec-1R helmet come with graphics that once again raise the bar for helmet graphics everywhere. Combining Suomy's state-of-the-art graphic technology with a unique series of base paints and ultra-smoothclear coating put the ultimate finish on these outstanding helmets. $629.95 XS 01-4483 SM 01-4484 MD 01-4485 LG 01-4486 XL 01-4487 XXL 01-4488 XXXL 01-4489	SUOMY HELMETS EXTREME AUSTRALIAN STYLE • The lightest weight (1250 grams), race approved helmet available • 3 shell sizes for ultimate fit • DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) • Removable washable 3D cheek pads (allows for adjustable custom fit) • Removable washable Comfort liner (allows for adjustable custom fit) • Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers • Safety Lock visor system • Breath Deflector • S.E.C.™ (Structurally Enhanced Composite Fiber Weave) • Hot Cured Bag Molded construction • Oversized sponge cervical neck roll • Advanced Channeled EPS for optimum venting • Race approval by every major US Motorcycle Race Organization • DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls • Ultra Tech Face Shield - Standard to the Extreme is a unique face shield incorporating a beautifully translucent Opalescent Iridium finish with a special hydrophobic coating - this allows water to easily roll off the surface of the shield, an anti-IR coating to block heat and keep the riders face cool, and a state-of-the-art anti-fog coating. And that's just the face shield! • Alcantara - Used in the finest exotic sports cars and top class furnishings, Alcantara is a luxurious fabric offering a level of softness, comfort and quality never before seen in the helmet market. Now, Alcantara is being used exclusively for the Spec-1R Extreme's comfort liner, providing a perforated chamois-like material for ultimate comfort, water wicking, coolness and durability. • Ram Air Intake - The Spec 1R Extreme comes standard with this new cooling device. Located above the top of the forehead, this specially designed intake duct forces air into the helmet body in the open position, pressurizing cool air into the Spec 1R's unique waffled EPS channeled system. Flipping the switch to the off position on the Intake Duct closes the ram air intake from the rest of the system. • Air Wedge Top Diffuser - An extreme helmet deserves an extreme top diffuser and the new, Suomy Air Wedge is just that: designed to work in concert with the Ram Air Intake duct, the Air Wedge performs the duty of extracting hot air from the helmet body and out the back of the wedge. Its aggressive design provides a further function; the Air Wedge creates vortices towards the back of the helmet, defeating the potential for helmet lift at high speeds providing an extremely stable helmet, even at Daytona speeds. • Ultimate Graphics - Suomy is renowned for its top quality graphics. The Extreme series of the Spec-1R helmet come with graphics that once again raise the bar for helmet graphics everywhere. Combining Suomy's state-of-the-art graphic technology with a unique series of base paints and ultra-smoothclear coating put the ultimate finish on these outstanding helmets. $629.95 XS 01-4583 SM 01-4584 MD 01-4585 LG 01-4586 XL 01-4587 XXL 01-4588 XXXL 01-4589	SUOMY HELMETS EXTREME Extreme Cathedral • The lightest weight (1250 grams), race approved helmet available • 3 shell sizes for ultimate fit • DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) • Removable washable 3D cheek pads (allows for adjustable custom fit) • Removable washable Comfort liner (allows for adjustable custom fit) • Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers • Safety Lock visor system • Breath Deflector • S.E.C.™ (Structurally Enhanced Composite Fiber Weave) • Hot Cured Bag Molded construction • Oversized sponge cervical neck roll • Advanced Channeled EPS for optimum venting • Race approval by every major US Motorcycle Race Organization • DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls • Ultra Tech Face Shield - Standard to the Extreme is a unique face shield incorporating a beautifully translucent Opalescent Iridium finish with a special hydrophobic coating - this allows water to easily roll off the surface of the shield, an anti-IR coating to block heat and keep the riders face cool, and a state-of-the-art anti-fog coating. And that's just the face shield! • Alcantara - Used in the finest exotic sports cars and top class furnishings, Alcantara is a luxurious fabric offering a level of softness, comfort and quality never before seen in the helmet market. Now, Alcantara is being used exclusively for the Spec-1R Extreme's comfort liner, providing a perforated chamois-like material for ultimate comfort, water wicking, coolness and durability. • Ram Air Intake - The Spec 1R Extreme comes standard with this new cooling device. Located above the top of the forehead, this specially designed intake duct forces air into the helmet body in the open position, pressurizing cool air into the Spec 1R's unique waffled EPS channeled system. Flipping the switch to the off position on the Intake Duct closes the ram air intake from the rest of the system. • Air Wedge Top Diffuser - An extreme helmet deserves an extreme top diffuser and the new, Suomy Air Wedge is just that: designed to work in concert with the Ram Air Intake duct, the Air Wedge performs the duty of extracting hot air from the helmet body and out the back of the wedge. Its aggressive design provides a further function; the Air Wedge creates vortices towards the back of the helmet, defeating the potential for helmet lift at high speeds providing an extremely stable helmet, even at Daytona speeds. • Ultimate Graphics - Suomy is renowned for its top quality graphics. The Extreme series of the Spec-1R helmet come with graphics that once again raise the bar for helmet graphics everywhere. Combining Suomy's state-of-the-art graphic technology with a unique series of base paints and ultra-smoothclear coating put the ultimate finish on these outstanding helmets. $629.95 XS 01-4413 SM 01-4414 MD 01-4415 LG 01-4416 XL 01-4417 XXL 01-4418 XXXL 01-4419
SUOMY HELMETS EXTREME Anthracite Flower • The lightest weight (1250 grams), race approved helmet available • 3 shell sizes for ultimate fit • DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) • Removable washable 3D cheek pads (allows for adjustable custom fit) • Removable washable Comfort liner (allows for adjustable custom fit) • Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers • Safety Lock visor system • Breath Deflector • S.E.C.™ (Structurally Enhanced Composite Fiber Weave) • Hot Cured Bag Molded construction • Oversized sponge cervical neck roll • Advanced Channeled EPS for optimum venting • Race approval by every major US Motorcycle Race Organization • DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls • Ultra Tech Face Shield - Standard to the Extreme is a unique face shield incorporating a beautifully translucent Opalescent Iridium finish with a special hydrophobic coating - this allows water to easily roll off the surface of the shield, an anti-IR coating to block heat and keep the riders face cool, and a state-of-the-art anti-fog coating. And that's just the face shield! • Alcantara - Used in the finest exotic sports cars and top class furnishings, Alcantara is a luxurious fabric offering a level of softness, comfort and quality never before seen in the helmet market. Now, Alcantara is being used exclusively for the Spec-1R Extreme's comfort liner, providing a perforated chamois-like material for ultimate comfort, water wicking, coolness and durability. • Ram Air Intake - The Spec 1R Extreme comes standard with this new cooling device. Located above the top of the forehead, this specially designed intake duct forces air into the helmet body in the open position, pressurizing cool air into the Spec 1R's unique waffled EPS channeled system. Flipping the switch to the off position on the Intake Duct closes the ram air intake from the rest of the system. • Air Wedge Top Diffuser - An extreme helmet deserves an extreme top diffuser and the new, Suomy Air Wedge is just that: designed to work in concert with the Ram Air Intake duct, the Air Wedge performs the duty of extracting hot air from the helmet body and out the back of the wedge. Its aggressive design provides a further function; the Air Wedge creates vortices towards the back of the helmet, defeating the potential for helmet lift at high speeds providing an extremely stable helmet, even at Daytona speeds. • Ultimate Graphics - Suomy is renowned for its top quality graphics. The Extreme series of the Spec-1R helmet come with graphics that once again raise the bar for helmet graphics everywhere. Combining Suomy's state-of-the-art graphic technology with a unique series of base paints and ultra-smoothclear coating put the ultimate finish on these outstanding helmets. $629.95 XS 01-4553 SM 01-4554 MD 01-4555 LG 01-4556 XL 01-4557 XXL 01-4558 XXXL 01-4559	SUOMY HELMETS EXTREME Extreme Flowers (White) • The lightest weight (1250 grams), race approved helmet available • 3 shell sizes for ultimate fit • DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) • Removable washable 3D cheek pads (allows for adjustable custom fit) • Removable washable Comfort liner (allows for adjustable custom fit) • Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers • Safety Lock visor system • Breath Deflector • S.E.C.™ (Structurally Enhanced Composite Fiber Weave) • Hot Cured Bag Molded construction • Oversized sponge cervical neck roll • Advanced Channeled EPS for optimum venting • Race approval by every major US Motorcycle Race Organization • DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls • Ultra Tech Face Shield - Standard to the Extreme is a unique face shield incorporating a beautifully translucent Opalescent Iridium finish with a special hydrophobic coating - this allows water to easily roll off the surface of the shield, an anti-IR coating to block heat and keep the riders face cool, and a state-of-the-art anti-fog coating. And that's just the face shield! • Alcantara - Used in the finest exotic sports cars and top class furnishings, Alcantara is a luxurious fabric offering a level of softness, comfort and quality never before seen in the helmet market. Now, Alcantara is being used exclusively for the Spec-1R Extreme's comfort liner, providing a perforated chamois-like material for ultimate comfort, water wicking, coolness and durability. • Ram Air Intake - The Spec 1R Extreme comes standard with this new cooling device. Located above the top of the forehead, this specially designed intake duct forces air into the helmet body in the open position, pressurizing cool air into the Spec 1R's unique waffled EPS channeled system. Flipping the switch to the off position on the Intake Duct closes the ram air intake from the rest of the system. • Air Wedge Top Diffuser - An extreme helmet deserves an extreme top diffuser and the new, Suomy Air Wedge is just that: designed to work in concert with the Ram Air Intake duct, the Air Wedge performs the duty of extracting hot air from the helmet body and out the back of the wedge. Its aggressive design provides a further function; the Air Wedge creates vortices towards the back of the helmet, defeating the potential for helmet lift at high speeds providing an extremely stable helmet, even at Daytona speeds. • Ultimate Graphics - Suomy is renowned for its top quality graphics. The Extreme series of the Spec-1R helmet come with graphics that once again raise the bar for helmet graphics everywhere. Combining Suomy's state-of-the-art graphic technology with a unique series of base paints and ultra-smoothclear coating put the ultimate finish on these outstanding helmets. $629.95 XS 01-4533 SM 01-4534 MD 01-4535 LG 01-4536 XL 01-4537 XXL 01-4538 XXXL 01-4539	SUOMY HELMETS EXTREME Blue Flower • The lightest weight (1250 grams), race approved helmet available • 3 shell sizes for ultimate fit • DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) • Removable washable 3D cheek pads (allows for adjustable custom fit) • Removable washable Comfort liner (allows for adjustable custom fit) • Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers • Safety Lock visor system • Breath Deflector • S.E.C.™ (Structurally Enhanced Composite Fiber Weave) • Hot Cured Bag Molded construction • Oversized sponge cervical neck roll • Advanced Channeled EPS for optimum venting • Race approval by every major US Motorcycle Race Organization • DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls • Ultra Tech Face Shield - Standard to the Extreme is a unique face shield incorporating a beautifully translucent Opalescent Iridium finish with a special hydrophobic coating - this allows water to easily roll off the surface of the shield, an anti-IR coating to block heat and keep the riders face cool, and a state-of-the-art anti-fog coating. And that's just the face shield! • Alcantara - Used in the finest exotic sports cars and top class furnishings, Alcantara is a luxurious fabric offering a level of softness, comfort and quality never before seen in the helmet market. Now, Alcantara is being used exclusively for the Spec-1R Extreme's comfort liner, providing a perforated chamois-like material for ultimate comfort, water wicking, coolness and durability. • Ram Air Intake - The Spec 1R Extreme comes standard with this new cooling device. Located above the top of the forehead, this specially designed intake duct forces air into the helmet body in the open position, pressurizing cool air into the Spec 1R's unique waffled EPS channeled system. Flipping the switch to the off position on the Intake Duct closes the ram air intake from the rest of the system. • Air Wedge Top Diffuser - An extreme helmet deserves an extreme top diffuser and the new, Suomy Air Wedge is just that: designed to work in concert with the Ram Air Intake duct, the Air Wedge performs the duty of extracting hot air from the helmet body and out the back of the wedge. Its aggressive design provides a further function; the Air Wedge creates vortices towards the back of the helmet, defeating the potential for helmet lift at high speeds providing an extremely stable helmet, even at Daytona speeds. • Ultimate Graphics - Suomy is renowned for its top quality graphics. The Extreme series of the Spec-1R helmet come with graphics that once again raise the bar for helmet graphics everywhere. Combining Suomy's state-of-the-art graphic technology with a unique series of base paints and ultra-smoothclear coating put the ultimate finish on these outstanding helmets. $629.95 XS 01-4563 SM 01-4564 MD 01-4565 LG 01-4566 XL 01-4567 XXL 01-4568 XXXL 01-4569
SUOMY HELMETS Extreme Flowers (Indigo) • The lightest weight (1250 grams), race approved helmet available • 3 shell sizes for ultimate fit • DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) • Removable washable 3D cheek pads (allows for adjustable custom fit) • Removable washable Comfort liner (allows for adjustable custom fit) • Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers • Safety Lock visor system • Breath Deflector • S.E.C.™ (Structurally Enhanced Composite Fiber Weave) • Hot Cured Bag Molded construction • Oversized sponge cervical neck roll • Advanced Channeled EPS for optimum venting • Race approval by every major US Motorcycle Race Organization • DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls • Ultra Tech Face Shield - Standard to the Extreme is a unique face shield incorporating a beautifully translucent Opalescent Iridium finish with a special hydrophobic coating - this allows water to easily roll off the surface of the shield, an anti-IR coating to block heat and keep the riders face cool, and a state-of-the-art anti-fog coating. And that's just the face shield! • Alcantara - Used in the finest exotic sports cars and top class furnishings, Alcantara is a luxurious fabric offering a level of softness, comfort and quality never before seen in the helmet market. Now, Alcantara is being used exclusively for the Spec-1R Extreme's comfort liner, providing a perforated chamois-like material for ultimate comfort, water wicking, coolness and durability. • Ram Air Intake - The Spec 1R Extreme comes standard with this new cooling device. Located above the top of the forehead, this specially designed intake duct forces air into the helmet body in the open position, pressurizing cool air into the Spec 1R's unique waffled EPS channeled system. Flipping the switch to the off position on the Intake Duct closes the ram air intake from the rest of the system. • Air Wedge Top Diffuser - An extreme helmet deserves an extreme top diffuser and the new, Suomy Air Wedge is just that: designed to work in concert with the Ram Air Intake duct, the Air Wedge performs the duty of extracting hot air from the helmet body and out the back of the wedge. Its aggressive design provides a further function; the Air Wedge creates vortices towards the back of the helmet, defeating the potential for helmet lift at high speeds providing an extremely stable helmet, even at Daytona speeds. • Ultimate Graphics - Suomy is renowned for its top quality graphics. The Extreme series of the Spec-1R helmet come with graphics that once again raise the bar for helmet graphics everywhere. Combining Suomy's state-of-the-art graphic technology with a unique series of base paints and ultra-smoothclear coating put the ultimate finish on these outstanding helmets. $629.95 XS 01-4573 SM 01-4574 MD 01-4575 LG 01-4576 XL 01-4577 XXL 01-4578 XXXL 01-4579	SUOMY HELMETS SPEC 1R Hodgson USA The lightest weight (1250 grams), race approved helmet available 3 shell sizes for ultimate fit DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) Removable washable 3D cheek pads (allows for adjustable custom fit) Removable washable Comfort liner (allows for adjustable custom fit) Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers Safety Lock visor system • Breath Deflector S.E.C.™ (Structurally Enhanced Composite Fiber Weave) Hot Cured Bag Molded construction Oversized sponge cervical neck roll Advanced Channeled EPS for optimum venting Race approval by every major US Motorcycle Race Organization DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls $480.95 XS 01-5593 SM 01-5594 MD 01-5595 LG 01-5596 XL 01-5597 XXL 01-5598 XXXL 01-5599	SUOMY HELMETS SPEC 1R HODGSON BLACK MATTE The lightest weight (1250 grams), race approved helmet available 3 shell sizes for ultimate fit DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) Removable washable 3D cheek pads (allows for adjustable custom fit) Removable washable Comfort liner (allows for adjustable custom fit) Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers Safety Lock visor system • Breath Deflector S.E.C.™ (Structurally Enhanced Composite Fiber Weave) Hot Cured Bag Molded construction Oversized sponge cervical neck roll Advanced Channeled EPS for optimum venting Race approval by every major US Motorcycle Race Organization DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls $480.95 XS 01-5643 SM 01-5644 MD 01-5645 LG 01-5646 XL 01-5647 XXL 01-5648 XXXL 01-5649
SUOMY HELMETS SPEC 1R Bellagio The lightest weight (1250 grams), race approved helmet available 3 shell sizes for ultimate fit DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) Removable washable 3D cheek pads (allows for adjustable custom fit) Removable washable Comfort liner (allows for adjustable custom fit) Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers Safety Lock visor system • Breath Deflector S.E.C.™ (Structurally Enhanced Composite Fiber Weave) Hot Cured Bag Molded construction Oversized sponge cervical neck roll Advanced Channeled EPS for optimum venting Race approval by every major US Motorcycle Race Organization DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls $480.95 XS 01-5723 SM 01-5724 MD 01-5725 LG 01-5726 XL 01-5727 XXL 01-5728 XXXL 01-5729	SUOMY HELMETS SPEC 1R ITALIAN FLAG The lightest weight (1250 grams), race approved helmet available 3 shell sizes for ultimate fit DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) Removable washable 3D cheek pads (allows for adjustable custom fit) Removable washable Comfort liner (allows for adjustable custom fit) Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers Safety Lock visor system • Breath Deflector S.E.C.™ (Structurally Enhanced Composite Fiber Weave) Hot Cured Bag Molded construction Oversized sponge cervical neck roll Advanced Channeled EPS for optimum venting Race approval by every major US Motorcycle Race Organization DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls $480.95 XS 01-5663 SM 01-5664 MD 01-5665 LG 01-5666 XL 01-5667 XXL 01-5668 XXXL 01-5669	SUOMY HELMETS SPEC 1R AMERICAN EAGLE The lightest weight (1250 grams), race approved helmet available 3 shell sizes for ultimate fit DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) Removable washable 3D cheek pads (allows for adjustable custom fit) Removable washable Comfort liner (allows for adjustable custom fit) Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers Safety Lock visor system • Breath Deflector S.E.C.™ (Structurally Enhanced Composite Fiber Weave) Hot Cured Bag Molded construction Oversized sponge cervical neck roll Advanced Channeled EPS for optimum venting Race approval by every major US Motorcycle Race Organization DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls $480.95 XS 01-5613 SM 01-5614 MD 01-5615 LG 01-5616 XL 01-5617 XXL 01-5618 XXXL 01-5619
SUOMY HELMETS SPEC 1R OLD AMERICAN The lightest weight (1250 grams), race approved helmet available 3 shell sizes for ultimate fit DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) Removable washable 3D cheek pads (allows for adjustable custom fit) Removable washable Comfort liner (allows for adjustable custom fit) Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers Safety Lock visor system • Breath Deflector S.E.C.™ (Structurally Enhanced Composite Fiber Weave) Hot Cured Bag Molded construction Oversized sponge cervical neck roll Advanced Channeled EPS for optimum venting Race approval by every major US Motorcycle Race Organization DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls . $480.95 XS 01-5713 SM 01-5714 MD 01-5715 LG 01-5716 XL 01-5717 XXL 01-5718 XXXL 01-5719	SUOMY HELMETS SPEC 1R ARALDIC The lightest weight (1250 grams), race approved helmet available 3 shell sizes for ultimate fit DVRC™ (Dynamically Variable Resistance Crush Zone designed into the EPS) Removable washable 3D cheek pads (allows for adjustable custom fit) Removable washable Comfort liner (allows for adjustable custom fit) Anti-Fog / Anti -Scratch Face Shield • Sound Absorbing Polymers Safety Lock visor system • Breath Deflector S.E.C.™ (Structurally Enhanced Composite Fiber Weave) Hot Cured Bag Molded construction Oversized sponge cervical neck roll Advanced Channeled EPS for optimum venting Race approval by every major US Motorcycle Race Organization DOT approved and CERTIFIED to BSI 6658 Type A: providing unprecedented pre-public release batch testing of each production run, providing exacting quality controls $480.95 XS 01-5633 SM 01-5634 MD 01-5635 LG 01-5636 XL 01-5637 XXL 01-5638 XXXL 01-5639